Taiwan-Made · N-Type TOPCon
High Efficiency · High Reliability · The Most Dependable Solution for Green Energy
High Conversion Efficiency
High Durability
Sustainable & Green
Taiwan-Made
Taiwan's only all-new full-line N-type TOPCon cell fab × state-of-the-art M10 module line. In-house cells, vertically integrated.
VPC CertifiedUL 61730IEC 61215IEC 61730
2025 Golden PV AwardMIT CertifiedISO 9001:2015100% Taiwan-Made · Zero Chinese OwnershipVPC CertifiedUL 61730IEC 61215IEC 617302025 Golden PV AwardMIT CertifiedISO 9001:2015Not every IEC-certified module wins a Golden PV Award.
Voyager Series I earned the 2025 Taiwan Excellent PV Award by passing reliability tests that go beyond international standards.
2025 TAIWAN EXCELLENT PV
The solar market runs on three tiers of reliability standard —
imported modules, standard VPC-certified modules, and Golden PV
Award winners. Voyager Series I was benchmarked against all
three, and leads on every measure that matters.
THREE-TIER RELIABILITY COMPARISON
+33% exposure, only tier with a degradation cap
Voyager Series I
20 kWh/m²
Degradation ≤ 2%
Standard VPC Module
15 kWh/m²
No degradation cap
Imported Module Baseline
15 kWh/m²
No degradation cap
Highest severity tier on the market
Voyager Series I
Severity 8
Standard VPC Module
Severity 6
Imported Module Baseline
Severity 6
Meets VPC baseline · 3× imported modules
Voyager Series I
DH 3000
Standard VPC Module
DH 3000
Imported Module Baseline
DH 1000
Meets VPC baseline · 3× imported modules
Voyager Series I
TC 600
Standard VPC Module
TC 600
Imported Module Baseline
TC 200
2× the industry baseline
Voyager Series I
7200 / 5400 Pa
Standard VPC Module
3600 / 2400 Pa
Imported Module Baseline
3600 / 2400 Pa
2.5× the industry baseline
Voyager Series I
2500 / 2500 Pa
Standard VPC Module
1000 / 1000 Pa
Imported Module Baseline
1000 / 1000 Pa
Only tier that runs the full sequential-stress suite
Voyager Series I
ML (±5400 Pa) · DML (±2500 Pa) · TC50 · HF10
Standard VPC Module
None
Imported Module Baseline
None
Only tier certified against the new UVID requirement
Voyager Series I
120 kWh/m²
Degradation ≤ 5%
Standard VPC Module
None
Imported Module Baseline
None
Per the Energy Administration’s amended regulation, rooftop PV modules will be required to withstand 5400 Pa wind load — equivalent to Category-17 gusts.
Choose a durable, reliable PV module — Voyager protects your roof.
8
Enhanced Test Items
2025
Taiwan Excellent PV Award
Beyond IEC
Standard Module Test Baseline
We don't just meet IEC. We choose to go further.
Explore Voyager Series I →On July 4, 2025, the US signed the One Big Beautiful Bill Act — supply chain origin now decides solar tax credit eligibility.
Voyager Series I: cells self-produced in Taiwan, modules assembled in Taiwan, 100% VPC certified, zero Chinese equity ownership.
100% TAIWAN-MADE · TRANSPARENT SUPPLY CHAIN
Voyager’s cells are self-produced and every module is assembled in
Taiwan, with 100% official VPC certification — a registration scheme
that requires solar cells to be registered as non-mainland-Chinese
origin. Our shareholders are entirely Taiwanese institutional capital,
with zero Chinese ownership — and we provide sourcing documentation
so US-market EPCs and developers can verify their own compliance.
Official VPC Registration
Registered cell origin: non-mainland-China
+6% Taiwan FIT Bonus Rate
N-type TOPCon cells are self-produced at our Ilan fab. Wafer feedstock sourcing varies by procurement batch — full documentation available per order.
Every module is assembled at our Pingtung plant — fully domestic, never an overseas OEM relabel.
Taiwan’s official registration scheme requires solar cells to be registered as non-mainland-Chinese origin.
OBBBA / FEOC THRESHOLDS
OBBBA / FEOC Threshold
≤ 25%
Voyager Series I
0%
No Chinese equity ownership — verified fact
OBBBA / FEOC Threshold
Material assistance cost ratio ≤50% (2025) → ≤15% (2030)
Voyager Series I
Disclosed per batch
Cell processing 100% in Taiwan; wafer sourcing documentation provided per order for your own ratio calculation
OBBBA / FEOC Threshold
Must be registered as non-mainland-China
Voyager Series I
100% compliant
In-house N-type TOPCon cells, registered at Ilan fab
Wafer feedstock origin varies by procurement batch and is not guaranteed to be non-Chinese — this can affect a project’s material assistance cost ratio. The information above is a policy summary (verified 2026-07-19), not tax or legal advice. Please request sourcing documentation from Voyager and confirm project-specific tax credit eligibility with your own tax or legal counsel.
100%
Cell Processing in Taiwan
100%
VPC Certified
0%
Chinese Equity Ownership
01 — Products
Premium materials. Universally compatible.
Product portfolios designed from the perspective of asset owners and system integrators — more capacity per site, better value per watt.
Voyager Series I VPB21A8 — Winner, 13th Golden PV Award (2025), General Module Category — Official Winners List ↗Certifications
IEC 61215 & UL 61730 Certified
MIT · Taiwan High-Efficiency PV Module VPC Verified
ISO 9001:2015 Quality Management Certified
M10 half-cut, 144-cell · 2278×1134×40mm · 32.5kg
Certifications
IEC 61215 & UL 61730 Certified
MIT · Taiwan High-Efficiency PV Module VPC Verified
ISO 9001:2015 Quality Management Certified
M10 half-cut, 120-cell · 1908×1134×40mm · 28kg
Certifications
IEC 61215 & UL 61730 Certified
MIT · Taiwan High-Efficiency PV Module VPC Verified
ISO 9001:2015 Quality Management Certified
M10 half-cut, 108-cell · 1722×1134×40mm · 25kg
Certifications
MIT · Taiwan High-Efficiency PV Module VPC Verified
ISO 9001:2015 Quality Management Certified
M6 full-cell, 120-cell · 1755×1038×40mm · 20kg
Coming Q3 2026
Specifications to be published upon certification and product launch.
02 — Regulation-Ready Solution
From August 1, 2026, new, expanded, or reconstructed buildings with a floor area of 1,000m² or more must install 1kW of solar PV per 20m². Voyager Series I answers with a radically simplified mounting method.
Just 2 rails and 7cm top clamps (no bottom locking required) — meets the new front/rear 5400Pa regulation.
1kW / 20m²
The New Mandate
Renewable Energy Development Act §12-1 and the MOI installation standard make rooftop PV mandatory for qualifying new buildings — compliance is now a construction-schedule item.
2 Rails × 7cm Clamps
Top-Clamping Only
Just two rails and 7cm top clamps per module — no rear bolting. Fewer parts and steps mean faster installation and lighter rooftop load, keeping new-build schedules on track.
5400Pa
Tested Structural Backing
The simplified method is backed by the datasheet-verified 7200Pa front / 5400Pa rear static load test (per Voyager installation manual), with anodized frames of 20µm or more.
Regulation summary verified 2026-07-18; confirm project applicability with local building authorities.
03 — Technology
The latest high-efficiency cell technology combined with highly automated production — cost-competitive modules with consistent quality.
N-type TOPCon cells produced in-house at the Ilan fab — full control over core technology, quality, and supply from cell to module.
Dual-glass structure improves wind-load resistance and cuts micro-crack and PID risk; front-side POE offers ultra-low moisture ingress with no acetic acid off-gassing.
Voyager 1 is the top-spec model and the only one on the market still in continuous mass production with a 4cm high-profile, VPC-certified frame — rated for 7200Pa front-side / 5400Pa rear-side static load, plus 4800Pa dynamic load on both sides, built to withstand the high winds of Taiwan's typhoon season. Paired with 20μm-thick anodizing, well beyond current market spec, for significantly stronger corrosion resistance.
Post-stringing, pre-lamination, post-lamination, and final inspection on every module, with materials sourced to 3x IEC standards.
Robotic arms and automated layout, stringing, and encapsulation equipment run the full line from cell to module, replacing repetitive manual work to cut human error and deliver consistent capacity and yield.
04 — Facilities
Ilan Plant
N-type TOPCon cell fab — Taiwan's only all-new full-line TOPCon cell production line, MIT-certified and in mass production since 2024.
Pingtung Plant
Module plant — highly automated all-new M10 module line, ISO 9001:2015 certified.
05 — About
Voyager Photovoltaic was founded in November 2021. Its English name draws inspiration from NASA’s Voyager space probes — a symbol of the company’s spirit of bold exploration and its drive to push the limits of solar technology.
The company holds NT$1.5 billion in paid-in capital, giving it a solid financial foundation, with a shareholder base that includes institutional investors such as Chailease Energy and Cathay Sustainable Fund — a strong vote of confidence in Voyager’s long-term growth.
Chairman & CEO Kuei-Chang Hsu has spent over two decades in the solar industry. He founded the world’s first mass-production P-type PERC solar cell plant (2012; 70MW annual capacity) and led Taiwan solar manufacturing’s first overseas acquisition, bringing deep expertise in technology innovation, industry integration, and global market positioning as he continues to lead Voyager Photovoltaic toward becoming a global leader in high-efficiency solar solutions.
Voyager’s cell processing and module assembly are 100% completed in Taiwan, with 100% official VPC registration — a scheme that requires solar cells to be registered as non-mainland-Chinese origin. Our shareholder base is entirely Taiwanese institutional capital, with zero Chinese ownership. Wafer feedstock sourcing varies by procurement batch, and we provide sourcing documentation per order — giving international customers, especially in the US market, a transparent and verifiable supply chain.
Learn More
06 — Projects
From warehouses, factories, farm sheds, and parking structures to rooftop, ground-mount, and dual-use installations — serving every project type and building long-term partnerships.
415.5KW
Tainan City Factory
345.42KW
Pingtung City Warehouse
216KW
Yilan County Farm Shed
197.625KW
Taoyuan City Auto Service Center
Hualien Tribal Community Public Buildings (Clinic & Office)
07 — Milestones
Voyager Photovoltaic founded; operations begin in Pingtung Technology Industrial Park
Taipei office established; Pingtung Technology Industrial Park land lease secured
Pingtung branch established; VPC-certified M6 PERC module launched; Ilan cell fab construction begins
Ilan fab completes Taiwan's only all-new full-line N-type TOPCon cell line and enters mass production (MIT-certified); Voyager Series I launched and VPC-certified
Golden Energy Award Honor Medal from Taiwan's Energy Administration; VPC modules join Taiwan's green energy supply chain
Voyager Series II coming in Q3
08 — News
2026-07-20
Taiwan's new Building Solar PV Installation Standard takes effect August 1, 2026, requiring solar PV on qualifying new-build projects over 1,000 m² — expected to add roughly 660MW of capacity annually.
TechNews ↗2026-02-23
A joint briefing by Taiwan's Ministry of the Interior and Ministry of Economic Affairs on the incoming building solar mandate raised three implementation concerns — rooftop greening conflicts, cross-unit installation on row houses, and maintenance responsibility once PV becomes shared building infrastructure.
Environmental Information Center (環境資訊中心) ↗2025-11-05
In its first-ever entry, Voyager Series I won Taiwan's 13th Golden PV Award from the Energy Administration, MOEA — Taiwan-made quality that stands the test.
TechNews ↗2025-10-29
Economic Daily News reports that Voyager PV's Ilan and Pingtung plants each run 500MW annual capacity, making it the only manufacturer producing 100% MIT-made cells and VPC-certified modules in-house.
Economic Daily News (經濟日報) ↗2024-12-24
In December 2024, Voyager Series I completed high-standard static load testing, upgrading structural strength across the line.
2024-05-19
Voyager Series I uses POE front-side encapsulation, balancing low water vapor transmission, PID resistance, and long-term reliability.
Past Updates
